Air ducts are one of the most common sources of dust in a home. They’re also easy to clean yourself, though you might want to consult a professional if your ducts are particularly dirty or dusty. If you don’t want to pay someone else to do it for you, here’s how to clean your own air ducts:
Remove Vent Covers And Wash Them
Use a sponge to wash them in a sink or bathtub, or bucket if you don’t have access to either of those things. Wash the vent covers with hot water and dish soap if possible (this will help remove any dirt that has accumulated on them).
Cover Vent Openings With Paper Towels
The next step is to cover the vent openings with a paper towel. This will catch any dust, debris, or other small particles that might otherwise be sucked into your ductwork and cause it to clog. The paper towel should not be too thick; you want it to be thin enough so that air can pass through it easily but thick enough to trap dust in place.
If you’re using regular kitchen towels instead of paper ones, they should already have been bleached by detergent during their manufacturing process—this makes them safe for use as filters between walls and ceilings (since bleach kills bacteria).
Loosen The Dust
Once you’re finished cleaning, keep a broom or brush handy. If you have a vacuum cleaner, use its brush attachment to remove any loose dust from your ducts.
If not, grab some wet/dry vacuum bags and follow the same method as above: insert them into each outlet until they are filled with water, and then pull them out again when they are saturated with air. This will help draw out any remaining debris in the air ducts.
Vacuum It Up
Use a vacuum with a blower attachment to really get into the crevices.
Use a crevice tool to get into small spaces.
Make sure your vacuum has a HEPA filter, which traps dust and allergens from entering your home. If it doesn’t have one, make sure you clean it regularly so that nasty stuff doesn’t build up inside of it! Make sure not to use any beater bar or rotating brush either—those can cause damage over time when they’re run through ductwork repeatedly without being cleaned properly first (which is why I recommend vacuums with separate tools).
Change Your Air Filter
Change your air filter whenever it needs to be replaced. This can vary depending on the type of filter you use and how often you use it, but generally speaking, it will change every 90 days or so.
How to replace your air filter: Remove the old one by removing the screws holding down its base (check for any hidden screws if there are any).
Then remove whatever’s left of that base and detach it from ductwork with a wrench or pliers if necessary—you want nothing left behind! Finally, pull out any clogged debris from inside before sliding in a new one; this should be easy enough with most models being made out of paper-thin materials like plastic rather than metal like most traditional filters still do today!
Replace vent covers
Replace vent covers. If your home has central air conditioning and heating units, then it’s likely that there are a few vents that need to be replaced in order to ensure proper airflow through your system. These should be replaced regularly to prevent any blockages or other problems with airflow.
Make sure the vent covers are securely fastened. You should also make sure that these vents have screws on them that can be tightened down properly so they don’t come loose over time and cause problems for anyone using them (or doing any other cleaning tasks).
Ensure that the vent covers aren’t too close to the floor surface; try not to put anything heavy like furniture against this surface as well because it could damage things like carpets or rugs which might otherwise be damaged by water getting into those areas where these objects touch up against each other.”
Here’s how to clean your air ducts without having to pay someone else to do it.
When it comes to cleaning your air ducts, there are a lot of things you should know. You don’t want to use bleach or harsh chemicals on the surfaces, because these can damage them and make them more likely to get dirty in the future. Also, don’t use a vacuum with a beater bar or brush attachment—these are too abrasive for delicate materials like drywall and plasterboard.
Finally: don’t use any type of vacuum with rotating brushes! These types of vacuums can actually force debris through the wall into your home’s central heating system (or even worse) if they’re used improperly.
Conclusion
To sum it up, there are a lot of different ways to clean your air ducts. You can use a vacuum cleaner, an air freshener, or even just paper towels. The most important thing is that you should always be careful when doing this and make sure all of the surfaces are clean before you put them back on. If you have any questions about cleaning your vents or need some advice on making sure they’re spotless then feel free to leave a comment below!
